Selecting The Motion Detection Mode; Setting The Sharpness Of The Filter - evertz HD9510UC Instruction Manual

HD9510UC High Definition Upconverter Manual

3.3.3. Selecting The Motion Detection Mode

The MOTION DETECTION menu allows the user to select the motion detection mode used during the
upconversion.
MOTION
DETECTION
Frame
Field
Mixed

3.3.4. Setting The Sharpness Of The Filter

The H/V FILTER menu allows the user to set the sharpness of the filter used during the upconversion.
H/V FILTER
Enhanced
Flat
Soft
User
Page 3-6
In Field mode the Upconverter interpolates on a field by field basis. This mode
is suitable for high-speed action but gives a softer overall upconversion.
In Frame mode the Upconverter interpolates based on a complete interlaced
frame thus providing a crisper image. It is a good choice for slower moving
images.
In Mixed mode the Upconverter uses a mix of frame and field interpolation and
generally provides the best overall upconversion. This is the factory default
mode.
There are three set filter values and a user selection that allows customization
of the filter.
When you select User, press the SELECT key to enter the individual H and V
filter values. Figure 3-3 shows the different characteristics of the filter when you
select different values.
Revision 1.1.1
OPERATION