Table of Contents
Advertisement
7700 MultiFrame Manual
7710UC-KF HD Key/Fill Up Converter
6.3.3. Setting the Input Video Standard
Video
Input Standard
Auto
525i59.94/60
625i50
6.3.4. Setting the Output Video Standard
Video
Output Standard
1080i59.94/60
1080p29.97/30
1080p29.97/30sF
1080p23.98/24
1080p23.98/24sF
720p59.94/60
720p29.97/30
1080p25
1080p25sF
1080i50
720p50
6.3.5. Displaying the Output Video Standard set by the DIP switches
Video
DIP Output Standard
1080i59.94/60
1080p29.97/30
1080p29.97/30sF
1080p23.98/24
1080p23.98/24sF
720p59.94/60
720p29.97/30
1080p25
1080p25sF
1080i50
720p50
7710UC-KF-10
This control selects the input video standard being used. The choice of
input standards available is dependent upon the Frame Rate menu setting.
For example to select 525i59.94/60 as the input format set the Frame Rate
menu to 59.94/29.97/23.98 and set this menu item to525i59.94/60.
Interlaced video formats are shown with the number of fields per second.
Grayed out standards are currently unavailable in this release. Table 5
shows the combinations of input and output formats supported.
This control selects the output standard desired.
standards available is dependent upon the Frame Rate menu setting.
Grayed out standards are currently unavailable in this release. Table 5
shows the combinations of input and output formats supported.
This menu item displays the output standard set by the DIP switches. Table
3 shows the DIP switch settings to select each of the video output formats.
When DIP switches 6 and 7 are set to the OFF position, the output video
standard is set by the Output Standard Menu item if DIP switch 8 is set to
Off or by VistaLINK™ if DIP switch 8 is set to On.
Grayed out standards are currently unavailable in this release. Table 5
shows the combinations of input and output formats supported.
Revision 0.2
The choice of output
Advertisement
Table of Contents
