Table of Contents
Advertisement
Common Name
1080i/59.94
1080i/50
1080p/29.97sF
1080p/25sF
1080p/23.98sF
The HD PROGAM OUT outputs contain the input high definition video with RP215 ancillary data (VANC)
and optional characters keyed in. Two identical digital video outputs are provided. One of these outputs
will normally be connected to the video recorder video input. In applications where a standard definition
video tape will be made concurrently with the high definition master, the other output will be connected to
the HD PROG input of the HD Afterburner.
2.5.2. Standard Definition Video Input and output
The standard definition program video source should be connected to the SDI PROGAM IN BNC. The
SD9025TR and the HDSD9025TR operating in standard definition mode are normally configured to
autodetect one of the standard definition digital video in the formats shown in Table 2-5. The 9025TR
video standard may also be set manually to match the incoming video type using the KeyLog Tracker
software.
Common Name
525i/59.94
625i/50
The SDI PROGAM OUT output contains the input standard definition video with RP201 Three Line VITC
data. This output will normally be connected to the standard definition master video recorder video input.
The SDI CHAR OUT output contains the input standard definition video with RP201 Three Line VITC data
and character burn-ins. This output will normally be connected to the standard definition offline video
recorder video input. The ANALOG CHAR OUT output contains a monitor quality composite analog
output for recording character burns to an analog VTR.
2.6.
CONNECTING THE VIDEO RECORDER TIME CODE
The frame rate of the Video timecodes will be the same as the system video frame rate. The Codes and
Outputs tabs of the configuration screens in the KeyLog TRACKER™ software, control the use of the
Video LTC reader and generator.
INSTALLATION
Pixels /
Active Lines
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
Table 2-4: High Definition Video Input Formats
Pixels /
Active Lines
720 x 480
720 x 576
Table 2-5: Standard Definition Video Input Formats
9025TR Series Film Footage Encoders Manual
Frame Rate
29.97 (30/1.001)
25
29.97 (30/1.001)
25
23.98 (24/1.001)
Frame Rate
29.97 (30/1.001)
25
Revision 1.3
Progressive
SMPTE
/Interlace
Standard
I
274M
I
274M
P (sF)
274M
P (sF)
274M
P (sF)
274M
Progressive
/Interlace
Standard
I
125M
I
ITU-R BT.601
Page 2-11
Advertisement
Table of Contents
