Table of Contents
Advertisement
7700 MultiFrame Manual
7710UC-HD HD UpConverter
To adjust any parameter, use the toggle switch to move up or down to the desired parameter and press
the pushbutton. The arrow will move to the right hand side of the line (
adjust the parameter. Using the toggle switch, adjust the parameter to its desired value. If the parameter
is a numerical value, the number will increase if you lift the toggle switch and decrease if you push down
on the toggle switch.
When you have stopped at the desired value, depress the pushbutton. This will update the parameter to
the selected value and move the arrow back to the left side of the parameter list (
and adjusting other parameters or use the BACK or EXIT commands.
6.2.
ON SCREEN DISPLAY – MAIN MENU
The OSD menu is arranged in a layered structure that groups similar configuration items together. The
following section gives a brief description of the first level of menus that appear when you enter the OSD
screens. Selecting one of these items will take you to the next menu level. Sections 6.3 to 6.9 provide
detailed descriptions of each of the sub menus. The tables in sections 6.3 to 6.9 are arranged in an
indented structure to indicate the path taken to reach the control. Menu items or parameters that are
underlined indicate the factory default values.
Video
Output Picture
Deinterlacer
Scaler
VITC Line Select
Audio
Utilities
7710UC-HD-10
Sets the input and output video standards and timing for the video output.
Configuration of the output picture aspect ratio, action on loss of input, panel
colours, and other items related to the output picture.
Configuration of the deinterlacer modes.
Configuration of the scaler filter sharpness
Controls the vertical interval time code reader lines (VBI Option only)
Sets the Audio groups
Card preset management and various debug and maintenance features.
Revision 1.3
) indicating that you can now
). Continue selecting
Advertisement
Table of Contents
