7700 MultiFrame Manual
7700DA4-SLKE(-HD) HD/SD-SDI StreamLINK® MPEG-2/H.264 Encoder over IP
4.3.6. Start / Stop Encoder Options
The Start Encoder and Stop Encoder buttons enable the user to start and stop the SLKE.
Figure 4-8: Start/Stop Encoder Buttons
UPGRADING THE FIRMWARE
4.4.
To upgrade a firmware file, select the Firmware Upgrade button in the top tool bar. The Evertz 7700DA4-
SLKx Firmware Upgrade screen will appear, as shown in Figure 4-9.
To load the file, select the Browse button and navigate to the desired firmware file. Once the file appears
in the Get a file field, select the Upgrade the file button.
Once the file is upgraded, the properties should be listed in the fields above.
To remove a file name, select the Clear file name button.
Figure 4-9: 7700DA4-SLKE Firmware Upgrade
Page - 13
Revision 1.2