Setup - CYBEX 525T Service Manual

2. Without falling off the treadmill, carefully step backward until the e-stop pulls out of the console.
If the e-stop clip falls off your clothing then the test has failed. Reclip the e-stop clip to your clothing
and repeat this step.
3. Replace the e-stop key.
4. The treadmill is now ready to be used. Ensure the e-stop clip is secured to your clothing at all times
during use.
5. After use, remove the e-stop key from the treadmill.
The e-stop key can be removed to help prevent unauthorized use. Refer to the Stopping the Treadmill
section in the Operation chapter for more information about the e-stop key.
When not in use store the e-stop clip on the storage tab located on the left or right side of the handrail.

Setup

Use the following instructions to setup the unit.
Cybex 525T Treadmill Part Number
Falling hazard. When starting unit
• Stand on two top steps.
• Do not stand on belt.
Page 26 of 199
Item Description
1 Handrail
2 Storage tab
3 E-Stop clip
Qty.
1
2
1