CYBEX 525T Service Manual page 33

6 Speed keys
7 Volume keys
8 Display option key
9 Headphone jack
10 STOP key
11 Setup key
12 Enter key
13 Up/Down keys
Setup UHF Transmitters
1.
Press and the hold the Display option
Display will show time setup.
2.
Press Down
Press the ENTER
3.
Press the UP
4.
Press the ENTER
5.
Press the ENTER
6. Press Quick Start to select your transmitter type from the available choices. The display will only
show choices available under your transmitter type (900 MHz, 863 MHz or 806 MHz).
Cybex 525T Treadmill Part Number
Toggles the display for Adding new channels or Deleting stored
channels.
Increase or decrease volume.
Scans for available TV transmitters.
Plug in headphones to listen to channels.
Stores and exits setup
Toggles near/far for UHF receiver sensitivity.
Enters menu, accepts value shown, moves forward in menu.
Navigates TV channels.
to navigate to the A/V setup screen.
key.
and Down keys to select UHF.
key.
key again to change transmitter type.
and UP keys for 3 seconds.
Page 33 of 199