CYBEX 525T Service Manual page 164

2. Unplug the treadmill from the power outlet.
Remove power cord
1. Remove the mounting screw securing the mounting bracket in place using a Phillips screwdriver.
2. Unplug the power cord from the power cord inlet.
Power cord may be routed through frame. See Owner's manual.
Install power cord
1. Plug the power cord into the power cord inlet.
2. Install the power cord with the mounting screw and mounting bracket using a Phillips screwdriver.
Complete installation
1. Plug the power cord into the power outlet.
2. Verify the power cord is not being pinched under the front of the treadmill.
3. Operate the unit at all levels to verify proper operation.
Cybex 525T Treadmill Part Number
Shock and electrocution hazard.
• Unplug unit and let sit 10 minutes before cleaning or performing
maintenance.
• Electrical charge can remain in unit after unplugging.
• Keep water and liquids away from electrical parts.
Page 164 of 199
Item Description
1 Power Cord
2 Power Cord Inlet
3 Mounting Bracket
4 Mounting Screw
Item Description
1 Power Cord
2 Power Cord Inlet
3 Mounting Bracket
4 Mounting Screw
Qty.
1
1
1
1
Qty.
1
1
1
1