Disconnect drive motor cable
1. Locate the drive motor cable exiting the drive motor and connected to the motor controller.
2. Disconnect the drive motor cable from the motor controller.
3. Remove the cable tie securing the drive motor cable to the front roller shield using the side cutters.
Remove drive motor
1. Remove the four mounting nuts using a 1/2" Socket with a 6" extension.
Cybex 525T Treadmill Part Number
Page 153 of 199
Item
Description
1
Front Roller Shield
2
Drive Motor Cable
3
Motor Controller
4
Cable Tie
Item
Description
1
Mounting Nut
Qty.
1
1
2
1
Qty.
4