CYBEX 525T Service Manual page 188

Remove front cover
1. Remove the four short screws and one long screw securing the front cover and iPad clip to the
console assembly using a Phillips screwdriver.
2. Unplug cables from MCC board by un-latching connectors with the following procedure:
a) Press in the top of the cable connector.
b) Ensure latch disengages the connector.
c) Unplug cable by holding down latch and pulling straight out from connector. Do not pull on wires,
remove by connector.
Cybex 525T Treadmill Part Number
Item
Page 188 of 199
Description
1 Console assembly
2 Short screws
3 iPad clip
4 Long screw
Item Description
DO NOT PULL CONNEC-
1
TOR OUT BY THE WIRES!
2 Step a, Latch
3 Step b
4 Step c
Qty.
1
4
1
1
Qty.
1
1
1
1