CYBEX 525T Service Manual page 162

Install motor controller
1. Position the motor controller in place on the motor base plate.
2. Install the four screws that hold the motor controller to the motor base plate using a Phillips
screwdriver.
Connect cables to motor controller
1. Connect the cables to the motor controller.
This includes; the power in (INPUT), display cable (COMM.), elevation cable (INCLINE), drive motor
cable (OUTPUT) and resistor (DB).
2. Ensure all cables are connected firmly and securely in their proper place.
Install shield
Using a Philips screwdriver tighten the seven screws securing the shield to the base.
Cybex 525T Treadmill Part Number
Item
Item
Page 162 of 199
Description
1 Screws
2 Motor Base Plate
3 Motor Controller
Description
1 Power In (INPUT)
2 Display Cable (COMM.)
3 Elevation Cable (INCLINE)
4 Drive Motor Cable (OUTPUT)
5 Resistor (DB)
Qty.
4
1
1
Qty.
1
1
1
1
1