CYBEX 525T Service Manual page 152

Remove end caps
1. Remove two screws securing right end cap using a Phillips screwdriver.
2. Repeat step for left end cap.
Remove top steps
1. Remove the five screw covers from the right top step using a flat head screwdriver.
2. Remove the five screws and five screw cover bases securing the right top step using a Phillips
screwdriver.
3. Repeat steps for the left top step.
Loosen rear roller
Loosen the rear roller mounting bolts using a 3/4" Socket wrench.
Loosen front roller
Loosen the front roller mounting bolts using a 9/16" Socket wrench.
Remove drive belt
Remove the drive belt off of the drive motor pulley.
Cybex 525T Treadmill Part Number
Item
Page 152 of 199
Item Description
1 Right end cap
2 Screws
Description
1 Screw cover
2 Screw
3 Screw cover base
4 Top step, right
Qty.
1
2
Qty.
5
5
5
1