CYBEX 525T Service Manual page 114

Remove motor cover supports
1. Remove the two screws securing the right motor cover support using a Phillips screwdriver.
2. Repeat step for the left motor cover support.
Remove rear roller
1. Remove the two rear roller bolts, washers, bushings and rear roller nuts (one roller bolt on each
side) using a 3/4" Socket wrench.
Loosen each bolt evenly, making sure not to loosen either bolt too many turns before moving to the
other bolt.
2. Lift one side of the rear roller and slide the roller out of the running belt.
Cybex 525T Treadmill Part Number
Page 114 of 199
Item Description
1 Screws
2 Motor cover support
Item Description
1 Rear roller nut
2 Bushing
3 Washer
4 Bolt
5 Rear roller
Qty.
2
1
Qty.
1
1
1
1
1