CYBEX 525T Service Manual page 186

2. Install the nine screws securing the E3 View Monitor to the console using a Phillips screwdriver.
3. Install the ground cable to the E3 View monitor using an 11/32" nut driver.
4. Screw the A/V and coax cables into the E3 View monitor.
5. Plug IR receiver cable into E3 View Monitor.
Install back cover
Install the four screws securing the back cover to the console assembly using a Phillips screwdriver.
Cybex 525T Treadmill Part Number
Item
Item
Page 186 of 199
Description
1 Console Assembly
2 E3 View Monitor
3 Screw
4 Ground wire screw
Description
1 Control board cable
2 A/V cable
3 Coax cable
Qty.
1
1
9
1
Qty.
1
1
1