CYBEX 525T Service Manual page 185

2. Unplug control board cable and Audio Visual cable from the E3 View monitor.
3. Unscrew the coax cable from the E3 View monitor.
4. Remove the ground cable from the E3 View monitor using an 11/32" nut driver.
5.
Remove the nine screws securing the E3 View Monitor to the console using a Phillips screwdriver.
Install E3 View Monitor
1.
Remove protective cover from new E3 View monitor screen and place on old E3 View monitor.
Cybex 525T Treadmill Part Number
Component damage. Do not touch front of E3 View Monitor. Oil from
fingertips will mark screen.
Component damage. Do not touch front of E3 View Monitor. Oil from
fingertips will mark screen.
Page 185 of 199
Item Description
1 Control board cable
2 A/V cable
3 Coax cable
Item Description
1 Console Assembly
2 E3 View Monitor
3 Screw
4 Ground wire screw
Qty.
1
1
1
Qty.
1
1
9
1