CYBEX 525T Service Manual page 129

Remove top steps
1. Remove the five screw covers from the right top step using a flat head screwdriver.
2. Remove the five screws and five screw cover bases securing the right top step using a Phillips
screwdriver.
3. Repeat steps for the left top step.
Remove rear roller
1. Remove the two rear roller bolts, washers, bushings and rear roller nuts (one roller bolt on each
side) using a 3/4" Socket wrench.
Loosen each bolt evenly, making sure not to loosen either bolt too many turns before moving to the
other bolt.
2. Lift one side of the rear roller and slide the roller out of the running belt.
Cybex 525T Treadmill Part Number
Item
Page 129 of 199
Description
1 Screw cover
2 Screw
3 Screw cover base
4 Top step, right
Item Description
1 Rear roller nut
2 Bushing
3 Washer
4 Bolt
5 Rear roller
Qty.
5
5
5
1
Qty.
1
1
1
1
1