CYBEX 525T Service Manual page 184

3. Operate the unit at all levels to verify proper operation.
E3 View Monitor
Tools Required:
• Phillips screwdriver
• 11/32" Nut driver
• ESD (Electrostatic Discharge) grounding strap
Disconnect power source
Unplug the power cord from the power outlet.
Remove back cover
Remove four screws securing back cover to console assembly using a Phillips screwdriver.
Remove E3 View Monitor
1. Unplug IR receiver cable from E3 View Monitor.
Cybex 525T Treadmill Part Number
Shock and electrocution hazard.
• Unplug unit and let sit 10 minutes before cleaning or performing
maintenance.
• Electrical charge can remain in unit after unplugging.
• Keep water and liquids away from electrical parts.
Page 184 of 199
Item Description
1 Console Assembly
2 Back Cover
3 Screws
Qty.
1
1
4