CYBEX 525T Service Manual page 31

7.
Press the Up
LED console
none
PEM (Personal Entertainment Monitor)
UHF
C.A.B. or C-tu (Connected TV)
E3 View Monitor
Tuner (coax connection)
STB + Tuner (Set Top Box and coax cable con-
nection)
STB + HDMI (Set Top Box and HDMI cable
connection)
8. Plug in headphones to listen for channels during setup.
Shared TV Setup
The shared TV configuration uses a Wireless Audio Receiver Module to receive audio. TV's are mounted
on a wall or hung from a ceiling.
Tools Required:
Headphones (not included)
Setting up the Cybex Wireless Audio Receiver Module requires two steps:
1. Determine the type of transmitter used (MYE 900MHz, Broadcast Vision 863MHz, etc.
2. Assign a TV channel number to each transmitter on the console.
Cybex 525T Treadmill Part Number
or Down keys to select A/V type.
No TV available
No further setup is required
See Shared TV Setup
See Personal TV Setup
See Embedded TV Setup
See Embedded TV Setup
See Embedded TV Setup
Page 31 of 199