Item 1; Install End Caps; Install The Two Screws Securing The Right End Cap Using A Phillips Screwdriver; Description Qty - CYBEX 525T Service Manual

Install end caps

1. Install the two screws securing the right end cap using a Phillips screwdriver.

2. Repeat step for left end cap.
3. Align the top step to be centered between the hood cover support and end cap.
The gaps should be equal.
4. Tighten the five screws to 28 in-lbs (3.16 Nm) using a torque screwdriver.
5. Install the five screw covers to the top step.
6. Repeat steps for the left top step.
Center and tension the running belt
1. Plug the power cord into the power outlet.
2. Turn the main power switch to the on (I) position.
3. Tap the Quick Start icon.
Cybex 525T Treadmill Part Number
Do not use power toolsThe deck holes will strip out if over tightened.
Page 149 of 199
Item Description
1 Right end cap
2 Screws
Item Description
1 Motor cover support
2 Gaps
3 Top step
4 End cap
Qty.
1
2
Qty.
1
1
1
1