CYBEX 525T Service Manual page 122

Remove front roller
1.
Loosen the left mounting bolt using a 9/16" Socket wrench.
2. Loosen the right mounting bolt using a 9/16" Socket wrench.
3. Remove the front roller and slide the drive belt off of the front roller.
Remove running deck
1. Remove the fourteen bolts and fourteen flat washers that hold the deck in place using a 1/2" Socket
wrench.
The four rear pivot bolts are longer. The nuts may fall out of the deck pivots.
2. Slide the deck out of the frame.
The deck has two wear sides and can be flipped. If both sides are worn, replace deck.
Inspect deck bumpers
Inspect the deck bumpers for cracks or wear.
Cybex 525T Treadmill Part Number
Moving parts hazard. To avoid serious injury slowly release tension to
parts.
Replace the deck bumpers if the rubber is cracked or worn.
Page 122 of 199
Item Description
1 Front roller
2 Drive belt
3 Tensioning slot
4 Mounting bolt
Item Description
1 Bolt, deck, 5/16-18 x 1.5"
2 Flat washer
3 Deck
4 Bolt, pivot, 5/16-18 x 1.75"
Qty.
1
1
1
1
Qty.
10
14
1
4