CYBEX 700T Owner's Service Manual
  1. Manuals
  2. Brands
  3. CYBEX Manuals
  4. Treadmill
  5. 700T
  6. Owner's service manual
CYBEX 700T Owner's Service Manual

CYBEX 700T Owner's Service Manual

Cardiovascular systems
Hide thumbs Also See for 700T:
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 700T and is the answer not in the manual?

Questions and answers

Related Manuals for CYBEX 700T

Summary of Contents for CYBEX 700T

  • Page 2 Owner’s & Service Manual Cardiovascular Systems Part Number LT-14463-4 Rev H Cybex and the Cybex logo are registered trademarks of Cybex International, Inc. Stableflex and the Stableflex logo are registered trademarks of Cybex International, Inc. Polar is a registered trademark of Polar. DISCLAIMER: Cybex International, Inc.
  • Page 4 Cybex, International 10 Trotter Drive Medway MA 02053 NOTE: The serial number can be found on the base of the 700T. You may wish to record the serial number in the Customer Service section of this manual.
  • Page 5 NO POSTAGE NECESSARY IF MAILED IN THE UNITED STATES BUSINESS REPLY MAIL FIRST CLASS MAIL PERMIT NO. 73 MEDWAY, MA POSTAGE WILL BE PAID BY ADDRESSEE ATTN: CUSTOMER SERVICE CYBEX INTERNATIONAL 10 TROTTER DRIVE MEDWAY, MA 02053-9934...

  • Page 6: About This Manual

    English values are listed first, followed by metric units in parentheses. For example: 1” (2.54 cm). The 700T Treadmill is a newer model that has replaced the former 640CR model. This manual, part number LT-14463, should be referred to for 640CR questions. An Owner’s Manual is shipped with each 700T Treadmill.
  • Page 7 Cybex 700T Treadmill Owner’s Manual Declaration of Conformity We declare that to the best of our knowledge that the fitness equipment listed below, and manufactured by: Cybex International, Inc. 10 Trotter Drive Medway MA, 02053, USA Conforms to: Directives: 73/23/EEC, 89/336/EEC...

  • Page 8: Table Of Contents

    P5 - Fitness Test Program ..3-14 700T Schematic ....7-26 P6 - Saved Program ... . . 3-16 Workout Tips .
  • Page 9 Cybex 700T Treadmill Owner’s Manual...

  • Page 10: Safety

    Specifications ... 2-1 received. The voltage label is on the front of your treadmill. The power requirements for the 700T treadmill are a grounded, dedicated circuit, and one Operation Quick Operation Guide ..3-1 of the following: 115 VAC, 60 Hz and 20 amps, or 230 VAC, 50 Hz, and 15 amps, Detailed Operation Guide .

  • Page 11: Important Safety Instructions

    Cybex 700T Treadmill Owner’s Manual grounded, dedicated circuit, and one of the following: 115 VAC, 60 Hz and 20 amps, or 230 VAC, 60 Hz, and 15 amps, or 220/240 VAC, 50 Hz and 15 amps. Make sure that the treadmill is connected to an outlet having the same configuration as the plug.

  • Page 12: Quick Operation Guide

    Unpacking ....5-3 Assembling the Treadmill . . . 5-4 Testing the 700T Operation . 5-9 • Do not modify the treadmill in any way. Setting Operation Options. 5-10 •...

  • Page 13: Caution Labels

    Caution labels indicate a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. The caution labels used on the 700T are shown below. The complete parts list and exploded view is in chapter 7 of this manual and on the web. To replace any worn or damaged labels do one of the following: Visit eCybex.com to shop for...

  • Page 14: Emergency Stop

    Requirements ..5-3 Unpacking ....5-3 Assembling the Treadmill . . . 5-4 Testing the 700T Operation . 5-9 Setting Operation Options. 5-10 Customer Service Contacting Service .
  • Page 15 Cybex 700T Treadmill Owner’s Manual Page 1-6...

  • Page 16: Data Readouts

    10 years; deck and belt 1 year. Unpacking ....5-3 Assembling the Treadmill . . . 5-4 Testing the 700T Operation . 5-9 82” (208 cm) Setting Operation Options. 5-10 Customer Service Contacting Service .
  • Page 17 Cybex 700T Treadmill Owner’s Manual Page 2-2...

  • Page 18: Operation

    9. Press the STOP key at any time. Unpacking ....5-3 Assembling the Treadmill . . . 5-4 Testing the 700T Operation . 5-9 Setting Operation Options. 5-10 Detailed Operation Guide Customer Service Contacting Service .

  • Page 19: Setting Operation Options

    Cybex 700T Treadmill Owner’s Manual dedicated circuit, and one of the following: 115 VAC, 60 Hz and 20 amps, or 230 VAC, 50 Hz, and 15 amps, or 208/220 VAC, 60 Hz and 15 amps. 2. Locate the on/off (I/O) power switch on the front end of the treadmill (next to the power cord.

  • Page 20: Stopping The Treadmill

    Front Pages About this Manual ..i to reach your current weight. The 700T accepts weights from 50 to 400 lbs. FCC Compliance Information . i (23 to 182 kg). After five seconds, if no key has been pressed, the treadmill Declaration of Conformity .

  • Page 21: Control During Operation

    Cybex 700T Treadmill Owner’s Manual Press the STOP key a second time to begin a workout review. The totals reached during your workout session will cycle and the five minute pause will end. After the workout review is finished the treadmill will automatically change to Dormant Mode.

  • Page 22: Data Readouts

    Assembling the Treadmill . . . 5-4 cycles through your accumulated workout data at the end of a workout Testing the 700T Operation . 5-9 session. To review the data again (perhaps if you missed seeing a value), press Setting Operation Options. 5-10 SHIFT and the review sequence will repeat.

  • Page 23: Selecting Programs & Options

    Displaying Heart Rate In order for the 700T to display your heart rate, you must either use a Polar compatible heart rate transmitter belt, or your treadmill must have the optional Contact Heart Rate.

  • Page 24: Use Of Programs

    Important Safety Instructions 1-2 Caution Labels... 1-4 With the 700T, you choose from four different programs, all of which have nine Emergency Stop ..1-5...

  • Page 25: P2 - Speed Challenge

    Choose a level that reflects your fitness level as determined in the P5 Fitness Test program. Program Results — The P2 Speed Challenge program is one of the most challenging work- outs offered by your 700T. It is designed to push you to the limit to improve your walking speed.

  • Page 26: P6 - Saved Program

    Requirements ..5-3 Unpacking ....5-3 Assembling the Treadmill . . . 5-4 Testing the 700T Operation . 5-9 Setting Operation Options. 5-10 Customer Service Contacting Service .

  • Page 27: P3 - Cardiovascular Program

    Cybex 700T Treadmill Owner’s Manual P3 — Cardiovascular Program The P3 Cardiovascular Program is a thirty-minute workout that uses high-intensity, aerobic exercise to strengthen the heart muscle, stressing the heart at about 70% to 85% of its maximum pumping rate.

  • Page 28: Workout Tips

    Requirements ..5-3 Unpacking ....5-3 Assembling the Treadmill . . . 5-4 Testing the 700T Operation . 5-9 Setting Operation Options. 5-10 Customer Service Contacting Service .

  • Page 29: P4 - Weight Loss Program

    % grade for that “L” level. For example, if the current grade is 6% and the maximum is 8%, the 700T will increase to 8% grade for two minutes and then return to 6% grade for another five-minute segment. The speed remains constant during the entire period.
  • Page 30 Requirements ..5-3 Unpacking ....5-3 Assembling the Treadmill . . . 5-4 Testing the 700T Operation . 5-9 Setting Operation Options. 5-10 Customer Service Contacting Service .

  • Page 31: P5 - Fitness Test Program

    Cybex 700T Treadmill Owner’s Manual P5 — Fitness Test Program The P5 Fitness Test Program is a twenty-minute walking workout designed to test your aerobic walking capacity. It is the guide by which you determine which fitness “L” level is best suited to your current performance capability and physical condition.
  • Page 32 Service Schedule ..4-7 Log Sheet ....4-8 The 700T is designed to help you set goals and measure your progress. The Setup & Assembly Quick Setup .

  • Page 33: P6 - Saved Program

    Cybex 700T Treadmill Owner’s Manual P6 — Saved Program In addition to the four programmed workouts included with the 700T, you can also create your own workout by manually changing the speed and/or incline as you exercise. You increase or decrease the speed and incline settings, using SPEED - + keys and v ^ arrows.

  • Page 34: Workout Tips

    Unpacking ....5-3 Assembling the Treadmill . . . 5-4 2. Determine your target heart rate . Testing the 700T Operation . 5-9 Setting Operation Options. 5-10 A. Use the chart below to determine your target heart rate: Customer Service Contacting Service .
  • Page 35 Cybex 700T Treadmill Owner’s Manual Visit our website at www.ecybex.com/education to use the body mass calculator, calorie calculator, and to get performance training tips. Page 3-18...

  • Page 36: Preventive Maintenance

    (RMA) ....6-4 the 700T. Motors are especially susceptible to dust and dirt, and restricted Damaged Parts... 6-4 Ordering Parts .

  • Page 37: Running Belt Maintenance

    Service Schedule in this chapter to determine the minimum recommended cleaning. The running belt may become loose and slip on the drive roller with each foot plant. The 700T is equipped with visual indicators of belt tension. These are located at the rear of the treadmill where the two 3/4"...
  • Page 38 Unpacking ....5-3 belt can create excessive tension on the front and rear Assembling the Treadmill . . . 5-4 Testing the 700T Operation . 5-9 rollers. Setting Operation Options. 5-10 Customer Service ! CAUTION: While centering the belt choose one bolt to adjust.
  • Page 39 Cybex 700T Treadmill Owner’s Manual same bolt. Once the running belt has been adjusted closer to the center of the treadmill use about 1/4 of a turn until the belt has been stabilized. B. After the belt has been centered, check the belt tension again. Make sure the running belt tension is tight enough so that the belt does not slip or hesitate when stepped on.
  • Page 40 Unpacking ....5-3 Assembling the Treadmill . . . 5-4 5. Replace the side rails and motor cover. Testing the 700T Operation . 5-9 Setting Operation Options. 5-10 A. After completing the inspection and cleaning of the deck surface, snap Customer Service the side rails back down into their original position.

  • Page 41: Other Preventive Maintenance

    Cybex 700T Treadmill Owner’s Manual Other Preventive Maintenance Cybex recommends that the following maintenance activities be completed by a qualified service technician. These activities should be performed at the recommended intervals listed in the Service Schedule (located in this chapter): Measure the motor brushes and replace worn motor brushes Rotate, flip and replace the running deck.

  • Page 42: Service Schedule

    Unpacking ....5-3 m11: 55000 (88514) Assembling the Treadmill . . . 5-4 m12: 60000 (96560) Testing the 700T Operation . 5-9 60500 (97365) Setting Operation Options. 5-10 m13: 65000 (104607) m14:...

  • Page 43: Log Sheet

    Cybex 700T Treadmill Owner’s Manual Log Sheet Serial Number Date of Installation Date of Data Collection Total Miles/Kilometers Total Hours Motor Current @ 3 mph (4.8 kph) Motor Voltage @ 10 mph (16.1 kph) - without load - with 160 lbs. load...

  • Page 44: Setup & Assembly

    700T Schematic ..7-26 Do not install the 700T in an area of high humidity, such as in the vicinity of a steam room, sauna, indoor pool, or outdoors. Exposure to extensive water...
  • Page 45 Cybex 700T Treadmill Owner’s Manual Item Qty Description Base Left upright Right upright Console assembly Upright cross brace Button head screws Star washers Phillips head screws Motor cover Front wheels Figure 1 Page 5-2...

  • Page 46: Electrical Power Requirements

    Parts List ....7-21 Tools Required Exploded View ..7-25 700T Schematic ..7-26 • Phillips head screwdriver • Allen wrench 3/16” (supplied)

  • Page 47: Assembling The Treadmill

    Cybex 700T Treadmill Owner’s Manual Assembling the Treadmill To ensure correct assembly of the treadmill, carefully follow these steps: NOTES: • In this manual the words “left” and “right” denote the treadmill user's point of view. • Two people are needed to assemble this treadmill.

  • Page 48: Testing The 700T Operation

    Parts List ....7-21 Exploded View ..7-25 700T Schematic ..7-26 Figure 5...
  • Page 49 Cybex 700T Treadmill Owner’s Manual ! CAUTION: Be sure that the display cable does not get pinched, cut or damaged during this process. 5. Attach the console and left upright to the treadmill. A. Grasp the display cable and hold it against the inside face of the upright while lifting the console and attached left upright assembly.

  • Page 50: Exploded View

    Parts List ....7-21 Temporarily Display Exploded View ..7-25 Insert Speed Sensor 700T Schematic ..7-26 Screws (2) Figure 7 Page 5-7...
  • Page 51 NOTE: If necessary, install optional Screws CSAFE-compatible communications. If not skip to the next section, Test the 700T Operation Figure 9 A. Plug the CSAFE communications cable into the RJ-45 (8-pin) female connector located on the back of the console.
  • Page 52 Parts List ....7-21 Exploded View ..7-25 700T Schematic ..7-26 8. Press and hold down the SPEED + key until the treadmill reaches a speed of approximately 4 mph (6.4 kph), as indicated on the display.
  • Page 53 12. Press STOP three times to stop the running belt, end the checkout session, and return the display to Dormant Mode (with continuous display of the PRESS START prompt message). Finish your setup of the 700T by setting the operation options as desired. Page 5-10...

  • Page 54: Setting Operation Options

    Parts List ....7-21 program level and weight setting used. Exploded View ..7-25 700T Schematic ..7-26 Page 5-11...
  • Page 55 The right display window will not be illuminated. When “PoFF” is selected the programs are turned off and they are not available for use. The 700T can only be run manually. To toggle between “P on” for programs on and “PoFF” for programs off, use the v ^ keys.
  • Page 56 Parts List ....7-21 Exploded View ..7-25 700T Schematic ..7-26 Page 5-13...
  • Page 57 Cybex 700T Treadmill Owner’s Manual Page 5-14...

  • Page 58: Customer Service

    Exploded View ..7-25 FOR NON-CONSUMER BUYERS,” will be free from defects in material and 700T Schematic ..7-26 workmanship, under normal use and service according to the specified warranty duration listed, beginning from the date of installation.
  • Page 59 Cybex 700T Treadmill Owner’s Manual warranty shall be strictly and exclusively limited to repairing or replacing free of charge, F.O.B. origin, those parts and materials which are, in Seller's judgment, defective. Seller cannot control the environment nor manner in which the products are used; therefore this warranty does not...
  • Page 60 Exploded View ..7-25 ineffectiveness of the product, or other unintended consequences may result 700T Schematic ..7-26 because of many factors including the manner of use or application of the product, all of which are beyond the control of the Seller.

  • Page 61: Return Material Authorization (Rma)

    Cybex 700T Treadmill Owner’s Manual PROCEDURE FOR OBTAINING WARRANTY PERFORMANCE: TO SECURE THIS WARRANTY IN EVENT OF A DEFECT, BUYER MUST RETURN TO SELLER THE WARRANTY REGISTRATION CARD. CONTACT THE CYBEX CUSTOMER SERVICE DEPARTMENT WITH QUESTIONS REGARDING YOUR WARRANTY BY MAIL OR TELEPHONE FOR INSTRUCTIONS OR A RETURN AUTHORIZATION NUMBER AS PROVIDED BELOW.

  • Page 62: Damaged Parts

    Parts List ....7-21 Exploded View ..7-25 700T Schematic ..7-26 Page 6-5...
  • Page 63 Cybex 700T Treadmill Owner’s Manual Page 6-6...

  • Page 64: Service

    Tools Required Exploded View ..7-25 700T Schematic ..7-26 • Phillips head screwdriver (or hex key for some models) • Large flat head screwdriver (or brush cap tool, part number FS-12263) •...
  • Page 65 Cybex 700T Treadmill Owner’s Manual ! WARNING: Keep wet items away from inside parts of the treadmill. Electrical shock could occur even if the treadmill is unplugged. 1. Turn the power on. A. With the power cord plugged in turn the main power switch to the on (I) position.
  • Page 66 Exploded View ..7-25 A. Place each brush in its brush holder and carefully push the spring in 700T Schematic ..7-26 while screwing on the brush cap. If the brush cap is damaged, order Cybex replacement part number HX-10300-2.

  • Page 67: Motor Current & Voltage

    Cybex 700T Treadmill Owner’s Manual 10. Secure the front panel. A. Avoid touching R34 and the black capacitors. Connect the motor cable. See Figure 1. B. Using a 3/16” Allen wrench, secure the front panel to the frame with the four button head screws and four starwashers.
  • Page 68 Exploded View ..7-25 A. Turn the main power switch in the front panel to the off (O) position. 700T Schematic ..7-26 B. Unplug the treadmill from the power outlet.
  • Page 69 Cybex 700T Treadmill Owner’s Manual 3. Remove the motor cover and side rails. A. Remove the two Phillips head screws that fasten the motor cover to the frame. Lift the cover and set it aside. This will allow you to remove the side rails.

  • Page 70: Running Belt & Deck

    Parts List ....7-21 Exploded View ..7-25 700T Schematic ..7-26 3. Remove the side rails.
  • Page 71 Cybex 700T Treadmill Owner’s Manual A. Using a 3/16” Allen wrench, remove the two button head screws that fasten each side rail to the frame. This step will also loosen the end caps. B. Grip the top edge of each side rail and firmly pull it up and outward from the treadmill.

  • Page 72: Drive Belt

    Exploded View ..7-25 sure not to tighten one bolt too many turns before moving to the other 700T Schematic ..7-26 bolt.

  • Page 73: Rear Roller

    Cybex 700T Treadmill Owner’s Manual 12. Attach the drive belt tensioning assembly. A. Place the drive belt tensioning roller in position under the front bracket on the drive belt tensioning assembly. See Figure 3. B. Place the two steel bar springs over the drive belt tensioning roller plate and under the front bracket on the drive belt tensioning assembly.

  • Page 74: Error Codes

    SPEED LED on the motor control board. If it blinks when the flywheel is 700T Schematic ..7-26 rotated by hand, the problem is most likely the console cable. After that,...
  • Page 75 Cybex 700T Treadmill Owner’s Manual suspect the lower board and then the display board. This signal can also be seen on a diagnostic LED of the display board. If the drive motor (and running belt) does not rotate at all, the problem is more difficult to diagnose.
  • Page 76 Parts List ....7-21 Exploded View ..7-25 700T Schematic ..7-26 If either of these conditions exist, call your local Cybex dealer, authorized...

  • Page 77: Diagnostic Tests

    Cybex 700T Treadmill Owner’s Manual Cybex service representative or directly to Cybex Technical Support. An authorized Cybex technician can usually detect the source of the problem with a service visit. ERR 7: Loss of Novram This error code indicates a problem with the nonvolatile random access memory (NOVRAM) contents.
  • Page 78 Parts List ....7-21 Exploded View ..7-25 700T Schematic ..7-26 For example:...
  • Page 79 Cybex 700T Treadmill Owner’s Manual Active keys during this test (hold keys for two seconds): START/ENTER will advance you to the next diagnostic test. STOP will exit and return you to the mode you were in before entering Diagnostic Tests.
  • Page 80 Exploded View ..7-25 STOP will exit and return you to the mode you were in before entering 700T Schematic ..7-26 Diagnostic Tests.
  • Page 81 Cybex 700T Treadmill Owner’s Manual SHIFT backs you up one step in the diagnostics test menu. d9: Number of Starts This test displays the total accumulated distance to date, in miles (km), that the treadmill has been used. The diagnostic test number d9 is displayed in the left control panel window. The right control panel window displays the number of times that the treadmill has been started if 9,999 or less.
  • Page 82 Parts List ....7-21 Exploded View ..7-25 error clear command (Err C). 700T Schematic ..7-26 Page 7-19...
  • Page 83 Cybex 700T Treadmill Owner’s Manual To turn off a Service Reminder, press the + key, and the right window will display the Service Reminder clear command (nnC). Example 2: ErrC Press START to accept the clear command(s) and advance to d1.

  • Page 84: Parts List

    HX-14956 Disk Guide, Deck Edge Exploded View ..7-25 FM-14960 Flex Deck Indicator 700T Schematic ..7-26 Continued on next page Page 7-21...
  • Page 85 E-Prom, V3.15, 700T 230V (C-Safe) HX-14416 Clip, Wire Latching, U Shaped EC-15124 E-Prom, V3.15, 700T 115V (C-Safe) AF-14030 Plate, Front Panel, Aluminum AD-14000 Control PCB (For All 700T, Without HX-14416 Clip, Wire Latching, Grey Plastic E-prom) PL-13000 Cover, Motor Continued on next page HS-00700...
  • Page 86 Parts List ....7-21 Exploded View ..7-25 700T Schematic ..7-26 Page 7-23...
  • Page 87 Cybex 700T Treadmill Owner’s Manual Page 7-24...
  • Page 88 Cybex 700T Treadmill Owner’s Manual Page 7-25...
  • Page 89 CABLE,4-PIN CSAFE JUMPER EC-15052 BLACK COMMON SPEED (+) WHITE MAIN GREEN SPEED (-) SHIFT SHIELD STOP START/ENTER REF. ELEVATION DOWN MAIN ELEVATION UP REF. AW-15062 CABLE, 4-PIN SALUTRON JUMPER Based on SC-700T Rev E Page 7-26 Cybex 700T Treadmill Owner’s Manual...

Table of Contents

Save PDF