TransAct Ithaca 90PLUS Series Programmer's Manual page 65

Programmer's Guide
There is a configuration option that locks the graphic-save buffer and prevents a new graphic-save
operation from occurring until the lock is manually reset, which inhibits accidental deletion of the
graphic information.
Function
ASCII
Hexadecimal
Decimal
IPCL
EPOS
Description
Function
ASCII
Hexadecimal
Decimal
IPCL
EPOS
Description
Function
ASCII
Hexadecimal
Decimal
IPCL
EPOS
Description
Function
ASCII
Hexadecimal
Decimal
IPCL
EPOS
Description
Note
11/07/05
PcOS Series 90PLUS
Graphic-save print
[ESC] g <0>
1BH 67H 00H
<27> <103> <0>
&%GP
[ESC] g <0>
The [ESC] g <0> command prints the graphic-save buffer.
Start graphic-save record
[ESC] g <1>
1BH 67H 01H
<27> <103> <1>
&%GS
ESC] g <1>
The [ESC] g <1> command clears the graphic-save buffer and starts
recording data. The next 2000 bytes (including characters and commands)
will be recorded.
Stop graphic-save record
[ESC] g <2>
1BH 67H 02H
<27> <103> <2>
&%GE
[ESC] g <2>
The [ESC] g <2> command stops recording graphic-save information. The
buffer is not saved into nonvolatile memory.
Stop graphic-save record and save
[ESC] g <3>
1BH 67H 03H
<27> <103> <3>
&%GW
[ESC] g <3>
The [ESC] g <3> command stops recording graphic-save information. The
buffer is saved into the nonvolatile memory.
The printer will remain busy for about seven seconds after the command to
erase and resave the graphic-save buffer into the nonvolatile memory.
Rev Q
Printer Control Codes
Graphic Mode
Page 53