TransAct Ithaca 90PLUS Series Programmer's Manual page 109

Programmer's Guide
Function
ASCII
Description
Function
ASCII
Description
Function
ASCII
Description
Function
ASCII
Description
Function
ASCII
Description
11/07/05
PcOS Series 90PLUS
Generate pulse
[ESC] p <m> <t1> <t2>
The Series 90PLUS Printer does not allow the cash drawer pulse to be
altered under software control. The <m> value selects Drawer 1 or 2.
m values being: 0=1, 1=2.
Transmit paper status
[ESC] v
The Series 90PLUS Printer returns a status similar to EPOS.
The return byte is defined as follows:
Bit 0 Paper low
Bit 1 Paper low
Bit 2 0
Bit 3 0
Bit 4 0
Bit 5 Lower form sensor
Bit 6 Lower form sensor
Bit 7 0
Set impact energy
[GS] E <n>
The Series 90PLUS Printer allows higher impact energy in slip and
validation modes only.
Transmit specified ID
[GS] I <n>
The Series 90PLUS Printer always returns 0 for all ID's.
Transmit status back
[GS] r <n>
The Series 90PLUS Printer returns a status similar to EPOS.
The <n> byte is defined as follows:
1 = Transmit paper status
Bit 0 Paper low
Bit 1 Paper low
Bit 2 0
Bit 3 0
Bit 4 0
Bit 5 Lower form sensor
Bit 6 Lower form sensor
Bit 7 0
2 = Transmit cash drawer status
Bit 0 Cash Drawer 1 status
Bit 1 0
Bit 2 0
Bit 3 0
Bit 4 0
Bit 5 0
Bit 6 0
Bit 7 0
Rev Q
Printer Control Codes
EPOS Codes
Page 97