TransAct Ithaca 90PLUS Series Programmer's Manual page 106

Printer Control Codes
EPOS Codes
[ESC] j
Command
[ESC] l <n>
[ESC] p <m> <t1> <t2>
[ESC] q
[ESC] t <n>
[ESC] u <n>
[ESC] v
[ESC] x <n>
[ESC] { <n>
[ESC] ~ <n>
[GS] * ...
[GS] /
[GS] E <n>
[GS] I <n>
[GS] L ...
[GS] P ...
[GS] W ...
[GS] a <n>
[GS] h <n>
[GS] k <m> ... <0>
[GS] r <n>
Page 94
PcOS Series 90PLUS
Start reverse line feed.
Description
Set left margin in characters.
Generate pulse.
Release.
Select character code table. (Katakana and space
page are not supported).
Return status of cash drawer (serial and parallel,
IEEE 1284 only).
Transmit paper status (similar to Epson, serial, and
parallel, IEEE 1284 only).
Set print font (same as Normal [ESC] I <n>)
Turn upside down print ON/OFF.
Test mode diagnostic commands.
Define download bit image.
Print download bit image.
Set impact energy (available during validation
only).
Transmit specified ID.
Set left margin in 1/160 inch.
Fundamental units are fixed at 1/144 and 1/160
inch.
Select printable area in 1/160 inch.
Turn ON/OFF automatic status back (ASB).
ASB is not in the standard product. It is available
as a special order option only.
Set bar code height.
Print bar code.
Read status.
Rev Q
Programmer's Guide
Comment
Similar
Similar
Similar
Extension
Extension
Not implemented
Not implemented
Different
Not implemented
Extension
Extension
Similar
11/07/05