TransAct Ithaca 90PLUS Series Programmer's Manual page 52

Printer Control Codes
Character Attribute Commands
Function
ASCII
Hexadecimal
Decimal
IPCL
EPOS
Description
Function
ASCII
Hexadecimal
Decimal
IPCL
EPOS
Description
Function
ASCII
Hexadecimal
Decimal
IPCL
EPOS
Description
Function
ASCII
Hexadecimal
Decimal
IPCL
EPOS
Description
Function
ASCII
Hexadecimal
Decimal
IPCL
EPOS
Description
Note
Page 40
PcOS Series 90PLUS
Begin enhanced print
[ESC] G
1BH 47H
<27> <71>
&%ME
[ESC] G <1>
All subsequent text will be printed in enhanced print mode (two pass with a vertical
offset). Enhanced printing provides a deeper resolution of each character and may
enhance multiple-part form printing.
End enhanced print mode
[ESC] H
1BH 48H
<27> <72>
&%CE
[ESC] G <0>
The [ESC] H command cancels enhanced print mode and returns to the currently
selected font.
Begin emphasized print
[ESC] E
1BH 45H
<27> <69>
&%MM
[ESC] E <1>
The [ESC] E command begins emphasized print mode (one-pass mode with
horizontal offset). The print is bolder than normal print.
End emphasized print
[ESC] F
1BH 46H
<27> <70>
&%CM
[ESC] E <0>
The [ESC] F command cancels emphasized print mode.
Select superscript
[ESC] S <0>
1BH 53H 00H
<27> <83> <0>
&%SP
none
The [ESC] S <0> command selects superscript. All following characters will be
printed half size on the upper half of the print line.
The superscript feature is not available in all print modes. See page 34 for available
modes.
Rev Q
Programmer's Guide
11/07/05