TransAct Ithaca 90PLUS Series Programmer's Manual page 136

Product Self Tests
Zero
character
Interface
Communication
link
Page 124
PcOS Series 90PLUS
44 – Cyrillic I – 855
21 – Cyrillic II – 866
45 – Cyrillic II – 866
1 – French
2 – German
3 – British
4 – Danish I
5 – Swedish I
6 – Italian
7 – Spanish I
8 – Japanese
9 – Norwegian
10 – Danish II
11 – Spanish II
12 – Latin American
13 – French Canadian
14 – Dutch
15 – Swedish II
16 – Swedish III
17 – Swedish IV
18 – Turkish
19 – Swiss I
20 – Swiss II
64 – Publisher
The zero character can be configured to be unslashed or
slashed in all character sets except IBM 64 and 65, which
override this setting.
Unslashed
Slashed
The Series 90PLUS Printer contains both serial and
parallel communication links. However, only serial or
parallel are active at any one time. (Some printers
receive data on the parallel link and then drive other
devices with the serial link). Because both links are
present, the configuration for both is always available.
The communication link configurations are: serial, parallel,
and IEEE 1284. When a printer is assembled, it will be
either serial or parallel. This setting should not be changed
except from parallel to IEEE 1284.
Serial
Parallel
IEEE 1284
Rev Q
Programmer's Guide
Recommendation
11/07/05