Endress+Hauser Proline Promass H 300 PROFINET Operating Instructions Manual page 121

Proline Promass H 300 PROFINET
Parameter
Format display
Value 1 display
0% bargraph value 1
Endress+Hauser
Parameter overview with brief description
Prerequisite
A local display is provided.
A local display is provided.
A local display is provided.
Description
Select how measured values
are shown on the display.
Select the measured value that
is shown on the local display.
Enter 0% value for bar graph
display.
Commissioning
Selection / User Factory setting
entry
• 1 value, max. size 1 value, max. size
• 1 bargraph + 1
value
• 2 values
• 1 value large + 2
values
• 4 values
• Mass flow Mass flow
• Volume flow
• Corrected volume
*
flow
*
• Target mass flow
*
• Carrier mass flow
• Target volume
*
flow
• Carrier volume
*
flow
• Target corrected
*
volume flow
• Carrier corrected
*
volume flow
• Density
*
• Reference density
*
• Concentration
• Temperature
• Carrier pipe
*
temperature
• Electronic
temperature
• Oscillation
frequency 0
• Oscillation
*
amplitude 0
• Frequency
*
fluctuation 0
• Oscillation
*
damping 0
• Oscillation
damping
*
fluctuation 0
*
• Signal asymmetry
*
• Exciter current 0
• Totalizer 1
• Totalizer 2
• Totalizer 3
*
• Current output 1
*
• Current output 2
*
• Current output 3
• Pressure
• Application
*
specific output 1
• Index
inhomogeneous
medium
• Application
*
specific output 0
• Index suspended
*
bubbles
Signed floating-point Country-specific:
number • 0 kg/h
• 0 lb/min
121