Configuring The Measuring Device - Endress+Hauser Proline Promass H 300 PROFINET Operating Instructions Manual

Commissioning
88
10.5

Configuring the measuring device

• The Setup menu with its guided wizards contains all the parameters needed for standard
operation.
• Navigation to the Setup menu
X X X X X X X X
1.
2.
3.
 27 Taking the example of the local display
The number of submenus and parameters can vary depending on the device version.
Certain submenus and parameters in these submenus are not described in the
Operation Instructions. Instead a description is provided in the Special Documentation
for the device (→ "Supplementary documentation" section).

Setup
Name of station
‣
System units
‣
Communication
‣
Medium selection
‣
I/O configuration
‣
Current input 1 to n
‣
Status input 1 to n
‣
Current output 1 to n
‣
Pulse/frequency/switch output
1 to n
X
20.50
mA
0104-1
Main menu
Display language
English
Display/operat.
Setup
Main menu
Display/operat.
Setup
Diagnostic
Proline Promass H 300 PROFINET
/ ../Setup
Medium selection
XXXXXXXXX
XXXXXXXXX
→  89
→  89
→  91
→  93
→  94
→  95
→  97
→  97
→  101
Endress+Hauser
A0032222-EN