Endress+Hauser Proline Promass H 300 PROFINET Operating Instructions Manual page 90

Commissioning
Parameter
Mass flow unit
Mass unit
Volume flow unit
Volume unit
Corrected volume flow unit
Corrected volume unit
Density unit
Reference density unit
90
Corrected volume unit
Density unit
Reference density unit
Temperature unit
Pressure unit
Parameter overview with brief description
Description
Select mass flow unit.
Result
The selected unit applies for:
• Output
• Low flow cut off
• Simulation process variable
Select mass unit.
Select volume flow unit.
Result
The selected unit applies for:
• Output
• Low flow cut off
• Simulation process variable
Select volume unit.
Select corrected volume flow unit.
Result
The selected unit applies for:
Corrected volume flow parameter
(→  135)
Select corrected volume unit.
Select density unit.
Result
The selected unit applies for:
• Output
• Simulation process variable
• Density adjustment (Expert menu)
Select reference density unit.
Proline Promass H 300 PROFINET
Selection
Unit choose list
Unit choose list
Unit choose list
Unit choose list
Unit choose list
Unit choose list
Unit choose list
Unit choose list
→  90
→  90
→  90
→  91
→  91
Factory setting
Country-specific:
• kg/h
• lb/min
Country-specific:
• kg
• lb
Country-specific:
• l/h
• gal/min (us)
Country-specific:
• l (DN > 150 (6"): m³)
• gal (us)
Country-specific:
• Nl/h
• Sft³/min
Country-specific:
• Nl
• Sft³
Country-specific:
• kg/l
• lb/ft³
Country-dependent
• kg/Nl
• lb/Sft³
Endress+Hauser