Table of Contents
Advertisement
Proline Promass H 300 PROFINET
Endress+Hauser
0 to 20 mA
Failure mode
Pulse/frequency/switch output
Pulse output
Failure mode
Frequency output
Failure mode
Switch output
Failure mode
Relay output
Failure mode
Local display
Plain text display
With information on cause and remedial measures
Backlight
Red backlighting indicates a device error.
Status signal as per NAMUR recommendation NE 107
Interface/protocol
• Via digital communication:
PROFINET
• Via service interface
• CDI-RJ45 service interface
• WLAN interface
Plain text display
With information on cause and remedial measures
Web browser
Plain text display
With information on cause and remedial measures
Choose from:
• Maximum alarm: 22 mA
• Freely definable value between: 0 to 20.5 mA
Choose from:
• Actual value
• No pulses
Choose from:
• Actual value
• 0 Hz
• Defined value (f
2 to 12 500 Hz)
max
Choose from:
• Current status
• Open
• Closed
Choose from:
• Current status
• Open
• Closed
Technical data
229
Advertisement
Table of Contents
Need help?
Do you have a question about the Proline Promass H 300 PROFINET and is the answer not in the manual?