Wlan Configuration - Endress+Hauser Proline Promass H 300 PROFINET Operating Instructions Manual

Proline Promass H 300 PROFINET
Parameter
Display interval
Display damping
Header
Header text
Separator
Backlight
* Visibility depends on order options or device settings
Endress+Hauser
Prerequisite
A local display is provided.
A local display is provided.
A local display is provided.
In the Header parameter, the
Free text option is selected.
A local display is provided.
One of the following
conditions is met:
• Order code for "Display;
operation", option F "4-line,
illum.; touch control"
• Order code for "Display;
operation", option G "4-line,
illum.; touch control
+WLAN"
• Order code for "Display;
operation", option O
"Separate 4-line display,
illum.; 10m/30ft cable;
touch control"
10.6.6

WLAN configuration

The WLAN Settings submenu guides the user systematically through all the parameters
that have to be set for the WLAN configuration.
Navigation
"Setup" menu → Advanced setup → WLAN settings
‣
WLAN settings
WLAN
WLAN mode
SSID name
Network security
Security identification
User name
Description
Set time measured values are
shown on display if display
alternates between values.
Set display reaction time to
fluctuations in the measured
value.
Select header contents on local
display.
Enter display header text.
Select decimal separator for
displaying numerical values.
Switch the local display
backlight on and off.
Commissioning
Selection / User Factory setting
entry
1 to 10 s 5 s
0.0 to 999.9 s 0.0 s
• Device tag Device tag
• Free text
Max. 12 characters ------------
such as letters,
numbers or special
characters (e.g. @,
%, /)
• . (point) . (point)
• , (comma)
• Disable Enable
• Enable
→  124
→  124
→  124
→  124
→  124
→  124
123