Endress+Hauser Proline Promass H 300 PROFINET Operating Instructions Manual page 243

Proline Promass H 300 PROFINET
Endress+Hauser
Operating elements
• External operation via touch control (3 optical keys) without opening the housing: ,
, 
• Operating elements also accessible in the various zones of the hazardous area
Via remote display and operating module DKX001
The remote display and operating module DKX001 is available as an optional extra
→  219.
• The measuring device is always supplied with a dummy cover when the remote
display and operating module DKX001 is ordered directly with the measuring
device. Display or operation at the transmitter is not possible in this case.
• If ordered subsequently, the remote display and operating module DKX001 may not
be connected at the same time as the existing measuring device display module.
Only one display or operation unit may be connected to the transmitter at any one
time.
 35 Operation via remote display and operating module DKX001
Display and operating elements
The display and operating elements correspond to those of the display module →  242.
Material
The housing material of the display and operating module DKX001 depends on the choice
of transmitter housing material.
Transmitter housing
Order code for "Housing"
Option A "Aluminum, coated"
Option L "Cast, stainless"
Cable entry
Corresponds to the choice of transmitter housing, order code for "Electrical connection".
Connecting cable
→  30
Dimensions
Information on the dimensions:
"Mechanical construction" section of the "Technical Information" document.
Remote display and operating module
Material Material
AlSi10Mg, coated AlSi10Mg, coated
Cast stainless steel, 1.4409 (CF3M)
1.4409 (CF3M) similar
to 316L
Technical data
A0026786
243