Short instructions for use 6 Setting the handpieces
Define operating mode (PiezoLED only)
Note
The selection of the mode depends on the treatment method and the tip used. For
information about the selection of an operating mode, please refer to the "Operat‐
ing modes P1 / P2 / P3 and E" section of the "PiezoLED Instructions for Use".
▶ Press the "Mode" (S4) key for 4 seconds to select the operating mode.
ð Modes P1 / P2 / P3 / E are available for selection.
Symbol
6.2 Turbine
The following settings can be changed:
• Speed
▪ Cooling status
Settings menu for minimal/maximal speed
6.3 INTRA LUX Motor KL 703 LED and COMFORTdrive
The following settings can be changed:
• Direction of motor rotation
• Speed
▪ Cooling status
Settings menu for minimal/maximal speed
6.4 PiezoLED
Note
Please comply with the enclosed "PiezoLED" Instructions for Use.
Feature
Mode P1
Mode E
18