Specifications; Absolute Maximum Ratings; Esd Ratings; Recommended Operating Conditions - Texas Instruments MSPM0G350 Series Manual

www.ti.com

7 Specifications

7.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted)
VDD Supply voltage
V Input voltage
I
V Input voltage
I
Current into VDD pin
(source)
I
VDD
Current into VDD pin
(source)
Current out of VSS pin
(sink)
I
VSS
Current out of VSS pin
(sink)
Current of SDIO pin
Current of HS_IO pin
I
IO
Current of HDIO pin
Current of ODIO pin
I Supported diode current
D
T Junction temperature
J
T Storage temperature
stg
(1) Stresses beyond those listed under Absolute Maximum Rating may cause permanent damage to the device. These are stress
ratings only, which do not imply functional operation of the device at these or any other conditions beyond those indicated
under Recommended Operating Condition. Exposure to absolute-maximum-rated conditions for extended periods may affect device
reliability.

7.2 ESD Ratings

V Electrostatic discharge
(ESD)
(1) AEC Q100-002 indicates that HBM stressing shall be in accordance with the ANSI/ESDA/JEDEC JS-001 specification.

7.3 Recommended Operating Conditions

over operating free-air temperature range (unless otherwise noted)
VDD Supply voltage
VCORE Voltage on VCORE pin
C Capacitor connected between VDD and VSS
VDD
C Capacitor connected between VCORE and VSS
VCORE
T Ambient temperature, Q version
A
T Max junction temperature, Q version
J
Copyright © 2023 Texas Instruments Incorporated
At VDD pin
Applied to any 5-V tolerant open-drain pins
Applied to any common tolerance pins
-40℃ ≤ Tj ≤ 130℃
-40℃ ≤ Tj ≤ 85℃
-40℃ ≤ Tj ≤ 130℃
-40℃ ≤ Tj ≤ 85℃
Current sunk or sourced by SDIO pin
Current sunk or sourced by HSIO pin
Current sunk or sourced by HDIO pin
Current sunk by ODIO pin
Diode current at any device pin
Junction temperature
Storage temperature
(2)
Product Folder Links: MSPM0G3507-Q1 MSPM0G3506-Q1 MSPM0G3505-Q1
MSPM0G3507-Q1, MSPM0G3506-Q1, MSPM0G3505-Q1
(1)
Human body model (HBM), per AEC-Q100-002
Charged device model (CDM), per AEC-
Q100-011 , All pins
Charged device model (CDM), per AEC-
Q100-011 , Corner pins
(1)
(1) (2)
SLASF88 – OCTOBER 2023
MIN MAX UNIT
–0.3 4.1
–0.3 5.5
V + 0.3
DD
–0.3
(4.1 MAX)
80
100
80
100
6
6
20
20
±2
-40 130
–40 150
VALUE
(1)
±2000
±500
±750
MIN NOM MAX
1.62 3.6
1.35
10
470
–40 125
130
Submit Document Feedback
V
V
V
mA
mA
mA
mA
mA
mA
mA
mA
mA
°C
°C
UNIT
V
V
V
UNIT
V
V
µF
nF
°C
°C
27