Connections For Unused Pins - Texas Instruments MSPM0G350 Series Manual

MSPM0G3507-Q1, MSPM0G3506-Q1, MSPM0G3505-Q1
SLASF88 – OCTOBER 2023

6.4 Connections for Unused Pins

Table 6-4 lists the correct termination of unused pins.
(1)
PIN POTENTIAL
PAx and PBx
NRST
(1) Any unused pin with a function that is shared with general-purpose I/O must follow the "PAx and PBx" unused pin connection
guidelines.
26 Submit Document Feedback
Table 6-4. Connection of Unused Pins
Set corresponding pin functions to GPIO (PINCMx.PF = 0x1) and configure unused pins to
Open
output low or input with the internal pullup or pulldown resistor enabled.
NRST is an active-low reset signal. Pull the pin high to VCC, or the device cannot start. For
VCC
more information, see
Product Folder Links: MSPM0G3507-Q1 MSPM0G3506-Q1 MSPM0G3505-Q1
COMMENT
Section 9.1.
Copyright © 2023 Texas Instruments Incorporated
www.ti.com