Table of Contents
Advertisement
System Setup – Dispense Areas
Instructions
Define Dispense Areas
1. Cursor is in the dispense area number (DA01)
field.
2. The dispense area number will automatically incre-
ment up by 1 as you add areas or you can type the
number identification of the area.
3. Press ENTER on the keypad.
4. Cursor moves to the NAME field.
5. Type the name of the dispense area.
6. Press ENTER on the keypad.
7. Cursor moves to the first N in line three.
NOTE: The fluid numbers will be displayed accord-
ing to the number of fluids that were entered while
Entering the Fluid Data (shown on previous
page).
8. Leave the N if fluid #1 is not available at this dis-
pense area. Scroll to Y by pressing the
the fluid is available at this dispense area.
9. Press ENTER on the keypad to ENTER the value
and move to the next N.
10. Repeat step 8 and 9 until all the Y/N values are
entered and the cursor moves to ADD.
11. Press ENTER to repeat the screen and add anoth-
er dispense area.
– Or move the cursor to DELETE to delete the
dispense area that is displayed.
– Or move the cursor to EXIT to exit the dispense
area setup.
Save the Setup
Follow the Save Setup procedure on page 25.
DAO1 NAME:
1
2
3
N
N
N
ADD
DAO1 NAME:
1
2
3
N
N
N
ADD
or
key if
DAO1 NAME: BAY 1
1
2
3
N
N
N
ADD
DAO1 NAME: BAY 1
1
2
3
Y
Y
Y
ADD
Screens
4
5
6
N
N
N
EXIT
DELETE
4
5
6
N
N
N
EXIT
DELETE
4
5
6
N
N
N
EXIT
DELETE
4
5
6
N
N
Y
EXIT
DELETE
308–607
27
Advertisement
Table of Contents
