Table of Contents
Advertisement
CAUTION
The addresses in the software must match the
physical connections to the control modules or the
system will not operate properly.
Instructions
Startup Screen
This screen is displayed for four seconds after the
system is turned on, then the Mode Selection screen
(or Home screen) appears.
1. Mode Selection (HOME)
NOTE: This is the HOME screen. It is the destination
any time the HOME button on the keypad is pressed.
a. Cursor is initially on RUN.
b. Move the cursor to SETUP by pressing the
or
key.
NOTE: The SETUP option can only be modified on
the administrator keypad.
c. Press ENTER on the keypad.
2. Enter Password
NOTE: The password is determined by what is entered
during setup. The first time the system is started, the
Password is 1111.
a. Cursor is in the PASSWORD field.
b. Type the password.
c. Press ENTER on the keypad.
System Setup – Startup
Screens
STARTUP Screen
HORIZON
REV X.XX
GRACO INC
COPYRIGHT XXXX
HOME Screen
_ _ _ _ _ _ _ _ _ _
HOME
RUN
INVNT
PASSWORD Screen
ENTER PASSWORD
SETUP MENU
XXXX
_ _ _ _ _ _ _ _ _ _
SETUP
308–607
15
Advertisement
Table of Contents
