Pressure Relief Kit; Fluid Check Valve; Column Thermal Printer - Graco HORIZON Instructions-Parts List Manual

Horizon System Components

Pressure Relief Kit

Part No. 207–221, Pressure Relief Kit
900 psi (6.2 MPa, 62 bar) Maximum Working Pressure
For installation at the pump; see page 67. Relieves
fluid line pressure when the pressure exceeds 900 psi
(6.2 MPa, 62 bar). Includes the following replacement
parts:
Ref.
No. Part No. Description
1 167–453 TEE, pipe, 1/2 npt(m)
2 102–527 RELIEF VALVE
3 156–849 NIPPLE, 3/8 npt
4 205–169 HOSE, nylon, 3/8" ID, cpld
3/8 npsm (fbe); 3' (0.9 m) long
5 157–350 ADAPTER, 3/8 npt(m) x
1/4 npt(m)
6 167–452 ADAPTER, hose,
1–1/2" npt (m x f)
1
2
3
4
6 5
Pressure Relief Kit
50 308–607

Fluid Check Valve

Part No. 111–620, Check Valve
1500 psi (10.3 MPa, 103 bar) Maximum Working
Pressure
1/2 npt(fbe), Not Shown

40 Column Thermal Printer

Qty.
Part No. 113–774, Thermal Printer
1
1
Part No. 514–037, Printer Paper
1
Printer Replacement Paper, 1 roll
1
1
1
Printer
The Horizon system printer can print out individual job
tickets after each dispense transaction is completed. It
uses a roll of thermal paper and prints a 40-column-
width ticket, similar to a cash register receipt. These
dispense reports can be torn off immediately (for
attachment to an invoice, for instance) or saved for
later analysis. The printer is connected to the Master
Control Module by a 25 or 50 ft. (7.6 or 15.3 m) 22
AWG shielded cable.
Printer