Table of Contents
Advertisement
System Setup – Modify or New
Instructions
5. Modify Setup Options
a. With the cursor at MODIFY SETUP, press
ENTER on the keypad.
b. The SETUP OPTIONS screen will appear.
Only Master Control Module will have TIME
AND DATE on the screen.
c. Scroll to the option that needs to be modified
by pressing the
d. Press ENTER on the keypad when the cursor
is at the desired option.
e. Follow the instructions for modifying the se-
lected option on pages 24 to NO TAG.
f.
Everytime a setup option is modified and
saved, the controller will return to the SETUP
OPTIONS screen to allow another option to be
selected and modified until HOME is pressed.
NOTE: The options that can be defined in
MODIFY SETUP include:
Time and date*
Operator pass-
words
Control modules
Fluids
Dispense areas
Assign connec-
tions
* On Master Control Module only .
6. New Setup Options
NOTE: If you are installing a new system, use CLEAR
SETUP ALL MEMORY to prepare the system for
setup. See page 18.
a. With the cursor at NEW SETUP, press ENTER
on the keypad.
b. Follow the instructions for modifying the op-
tions on pages 24 to NO TAG.
c. Everytime a setup option is modified and
saved, the controller will go directly to the first
screen of the next setup subroutine.
NOTE: The options that can be defined in NEW
SETUP include:
Time and date*
Operator pass-
words
Control modules
Fluids
Dispense areas
Assign connec-
tions
* On Master Control Module only .
or
key.
Meter calibration
Inventory
Report options
Run options
System time outs
Meter calibration
Inventory
Report options
Run options
System time outs
Screens
_ _ _ _ _ _ _ _ _ _
SETUP
ENABLE CAN
MODIFY SETUP
NEW SETUP
MODIFY SETUP Screen
SETUP OPTIONS:
TIME AND DATE
OPERATOR PASSWORDS
CONTROL MODULES
_ _ _ _ _ _ _ _ _ _
SETUP
ENABLE CAN
MODIFY SETUP
NEW SETUP
_ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _
308–607
17
Advertisement
Table of Contents
