Table of Contents
Advertisement
The following Horizon Form pages show examples of
how to complete and use the forms to setup the sys-
tem. The example forms are filled out according to the
system design shown on page 55 and are based on
the flow of screens in a NEW SETUP.
Use Form #1 as a guide for inputting the operator
names and PIN numbers or passwords. The OPERA-
TOR PASSWORD screen will appear after accessing:
SETUP NEW SETUP.
Set Operator Access Information
1. Type the 4-character name in the NAME field and
press ENTER on the keypad.
2. Type the 4-digit password or PIN and press
ENTER.
Remember that the Basic Keypad only has
number keys.
3. Use the
or
keys to scroll the access levels to
RUN, INVNT (inventory level, which also gives
access to run level), and SETUP (which gives
access to all levels). Press the ENTER key when
the proper access level is displayed.
4. After entering the access level, the cursor will
move to ADD on the bottom line. If there are more
names to add, press ENTER and repeat steps 1 to
3. If all the operator names have been entered,
use the
or
keys to move the cursor to EXIT and
press ENTER.
Horizon Form #1
NOTE: Use the
DELETE if you need to delete operator entrees.
5. After EXIT is entered, the SAVE SETUP verifica-
6. Scroll to YES by pressing the
7. Press ENTER on the keypad to save the Operator
OPERATOR PASSWORD Screen
SAVE SETUP Verification Screen
or
keys to move the cursor to
tion screen will appear.
Access information and go to the CONTROL
MODULE screens, shown on page 59.
NAME:
_ _ _ _
PASSWORD:
_ _ _ _
ACCESS:
RUN
ADD
EXIT
NAME:
JOHN
PASSWORD:
1234
ACCESS:
RUN
ADD
EXIT
SAVE SETUP:
WARNING:
SAVE WILL CANCEL
ACTIVE JOBS
or
key.
or
DELETE
or
DELETE
YES
308–607
57
Advertisement
Table of Contents
