Table of Contents
Advertisement
Horizon System Components
Administrative Keypad
This keypad is needed to set up and make changes to
the system parameters. It can only be connected to the
Master Control Module.
The Administrative Keypad features a complete alpha-
betic keypad in addition to the numbers and navigation
keys of the other two keypads. This enables it to input
the labels for fluids, dispense areas, operator names
and other setup data.
With its full, complex set of keys, it is not intended for
everyday use in requesting dispense jobs, although it
can accomplish those tasks. It can also support the
attachment of a bar code reader.
The Administrative Keypad can be kept in the shop
foreman's office (or similar location), where it can be
used for occasional system configuration changes.
Another option is for the distributor or installer to keep
this keypad to maintain multiple installations.
Administrative Keypad
Keypad Specifications:
There can only be one Administrative Keypad in the
system, and it can only be connected to the Master
Control Module.
There is only one port for connecting keypads to a
Control Module, therefore, there can only be as
many keypads in a system as there are control
modules.
The entire system (regardless of size) can be
controlled from just one keypad or from multiple
keypads located out on the shop floor.
All of the keypads are connected to the Control
Modules by 25 or 50 ft. (7.6 or 15.3 m) 22 AWG
cables.
The bar-code reader can only be connected to the
Enhanced and Administrative keypads.
There is a wall-mount bracket accessory available
that will accept any of the keypads.
Keypad Wall-mount Bracket
Part No. 191–368
06520
Keypad Bracket
308–607
45
Advertisement
Table of Contents
