Flow Meters
For Proportioning Equipment
S3000
G3000
G3000 HR
G250/G250 HR, G3000/
G3000 HR and S3000
• P ositive displacement, spur gear
flow meter
• D esigned for non-abrasive
and unfilled materials
• H ighly accurate, even with low
flow rates
• S tainless steel compatible to handle
low to medium viscosity materials
• E TL us, ATEX- and CE-marked
HG6000
G250
G250 HR
HG6000/HG6000 HR
• P ositive displacement, helical gear
flow meter
• D esigned for higher flow rates
and higher viscosity materials
• H ighly accurate, even with low
flow rates
• S tainless steel, water-base compatible
for medium to high viscosity materials
• A TEX- and CE-marked
Coriolis Mass Flow
Coriolis Mass Flow
• Non-intrusive mass flow meter
• D esigned for all abrasive
and filled materials
• S tainless steel, waterborne and acid
compatible for a wide range of materials
• U ses less material to flush
• W ide range of flow rates and material
• F M-, CSA- and ATEX-marked
• A TEX- and CE-marked
• 1/8 in and 3/8 in ID options