Table of Contents
Advertisement
System Setup – Save Setup
Instructions
Save Setup
NOTE:
Any active or waiting jobs will be canceled when
you save the setup options.
The Master Control Module will update the copied
setup files in each Slave Control Module.
1. The SAVE SETUP verification screen will appear
with the cursor on NO.
If modifying the setup, pressing ENTER with
NO selected, will return to the SETUP OP-
TIONS screen without saving.
If entering a new setup, pressing ENTER with
NO selected, will return to the MODIFY SET-
UP options screen without saving.
2. Scroll to YES by pressing the
3. Press ENTER on the keypad to save the setup
options.
System Setup – Control Modules
Instructions
Name the Master Control Module
1. Cursor is in the NAME field.
2. Type the name of the control module location
(maximum of 10 characters).
3. Press ENTER on the keypad.
4. Cursor moves to ADD.
5. Press ENTER to add another control module.
Name Slave Control Modules
1. Cursor is in the CM# field.
2. The control module number will automatically in-
crement up by 1 as you add modules or you can
type the number identification
NOTE: The control module number must corre-
spond with the numbers setup on the control mod-
ule DIP switch.
3. Press ENTER on the keypad.
4. Cursor moves to the NAME field.
5. Type the name of the control module location.
6. Press ENTER on the keypad.
7. Cursor moves to ADD.
8. Press ENTER to add another control module.
– Or move the cursor to DELETE to delete the
control module entry that is displayed.
– Or move the cursor to EXIT to exit the control
module setup.
Save the Setup
Follow the Save Setup procedure above.
or
key.
Screens
SAVE SETUP:
WARNING:
SAVE WILL CANCEL
ACTIVE JOBS
SAVE SETUP:
WARNING:
SAVE WILL CANCEL
ACTIVE JOBS
Screens
NAME CONTROL MODULES
CM#01 (MASTER CM)
NAME:
ADD
NAME CONTROL MODULES
CM#02 (SLAVE CM)
NAME:
ADD
EXIT
NAME CONTROL MODULES
CM#02 (SLAVE CM)
NAME:
ADD
EXIT
NO
YES
EXIT
DELETE
DELETE
308–607
25
Advertisement
Table of Contents
