Table of Contents
Advertisement
Instructions
9. Dispense
a. After the dispense is confirmed, if the system
does not detect any problems, it will turn on
the correct air and fluid solenoids, enable the
meter pulse count, and start the time out clock.
b. The DISPENSE ACCEPTED screen will ap-
pear.
c. Dispense the fluid.
If the dispense was preset, the system will stop
dispensing when the preset amount is
reached.
If operating with free flow dispense, the fluid
will dispense whenever the operator activates
the dispense device.
d. Press any key on the keypad to get back to the
RUN screen.
e. Enter additional jobs as needed.
Run Mode – Dispensing
Screens
DISPENSE ACCEPTED Screen
DISPENSE ACCEPTED:
STATUS: READY
Press a key to cont.
RUN Screen
_ _ _ _ _ _ _ _ _ _
RUN
NEW JOB
REVIEW
_ _ _ _ _ _ _ _ _ _
308–607
35
Advertisement
Table of Contents
