Table of Contents
Advertisement
Instructions
Startup Screen
This screen is displayed for four seconds after the
system is turned on, then the Mode Selection screen
(or HOME screen) appears. If the system was turned
on previously, you will not see this startup screen.
Follow this procedure to start a fluid dispense job.
1. Mode Selection (HOME)
NOTE: This is the HOME screen. It is the destination
any time the HOME button on the keypad is pressed.
a. Cursor is at RUN.
b. Press ENTER on the keypad.
2. Enter Password
NOTE: The password is optional and is determined by
what is entered during setup. Get your password from
your system administrator.
a. Cursor is in the PASSWORD field.
b. Type the password.
c. Press ENTER on the keypad.
3. Select New Dispense Job
a. RUN screen appears.
b. Cursor is at NEW JOB.
c. Press ENTER on the keypad.
32
308–607
Run Mode – Dispensing
Screens
STARTUP Screen
HORIZON
REV X.XX
GRACO INC
COPYRIGHT XXXX
HOME Screen
_ _ _ _ _ _ _ _ _ _
HOME
RUN
INVNT
PASSWORD Screen
ENTER PASSWORD
RUN MENU
XXXX
RUN Screens
_ _ _ _ _ _ _ _ _ _
RUN
NEW JOB
REVIEW
_ _ _ _ _ _ _ _ _ _
SETUP
_ _ _ _ _ _ _ _ _ _
Advertisement
Table of Contents
