Table of Contents
Advertisement
System Setup – Clear Setup
Instructions
7. Clear Setup Options
CAUTION
Clearing the OPERATOR PASSWORDS or ALL
MEMORY will delete all passwords, including the
password the system is supplied with, which allows
Setup access. Before exiting SETUP, enter a new
password for Setup access. See page 24.
a. Move the cursor to CLEAR SETUP using the
key.
b. Press ENTER on the keypad.
c. The CLEAR OPTIONS screen will appear, with
the cursor at ALL MEMORY.
d. Scroll to the option that needs to be modified
by pressing the
e. Press ENTER on the keypad when the cursor
is at the desired option.
f.
The CLEAR verification screen will appear with
the cursor on NO. If ENTER is pressed with
NO selected, the screen will return to CLEAR
OPTIONS screen.
g. Scroll to YES by pressing the
h. Press ENTER on the keypad. The selected
table will be cleared and the CLEAR OPTIONS
screen will appear.
i.
Press BACK key to return to SETUP screen.
NOTE: The options that can be defined in
CLEAR SETUP include:
All memory
Operator pass-
words
Control modules
Fluids
Dispense areas
Assign connections
18
308–607
or
key.
or
key.
Meter calibration
Inventory
Report options
Run options
System time outs
Queues
Screens
_ _ _ _ _ _ _ _ _ _
SETUP
MODIFY SETUP
NEW SETUP
CLEAR SETUP
CLEAR OPTIONS Screen
CLEAR OPTIONS:
ALL MEMORY
OPERATOR PASSWORDS
CONTROL MODULES
CLEAR Verification Screen
CLEAR:
WARNING: YES WILL
CLEAR CURRENT
SETUP VALUES
_ _ _ _ _ _ _ _ _ _
NO
Advertisement
Table of Contents
