Table of Contents
Advertisement
Warning Symbol
WARNING
This symbol alerts you to the possibility of serious
injury or death if you do not follow the instructions.
FIRE, EXPLOSION, AND ELECTRIC SHOCK HAZARD
Improper grounding, poor air ventilation, open flames, or sparks can cause a hazardous condition and
result in fire or explosion and serious injury.
The Horizon System must only be installed and serviced by a qualified electrician.
Ground the equipment. See Connect AC Electrical Power to the Control Module, page 11.
Do not install the equipment in a hazardous area.
Extinguish all the open flames or pilot lights in the dispense area.
Keep the dispense area free of debris, including solvent, rags, and gasoline.
Do not smoke in the dispense area.
If there is any static sparking while using the equipment, stop dispensing immediately. Identify
and correct the problem.
Keep liquids away from the electrical components.
Disconnect electrical power at the main switch before servicing the equipment.
EQUIPMENT MISUSE HAZARD
Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result
INSTRUCTIONS
in serious injury.
This equipment is for professional use only.
Read all instruction manuals, tags, and labels before operating the equipment.
Use the equipment only for its intended purpose. If you are uncertain about usage, call your Graco
distributor.
Do not alter or modify this equipment. Use only genuine Graco parts and accessories.
Check the equipment daily. Repair or replace worn or damaged parts immediately.
Do not exceed the maximum working pressure of the lowest rated system component. See the in-
struction manuals of the individual system components for their maximum working pressures.
Do not stop or deflect fluid leaks with your hand, body, glove, or rag.
Follow the Shutdown Procedure on page 39 whenever you stop dispensing; or clean, check, or
service the equipment.
Use fluids or solvents that are compatible with the equipment wetted parts. See the Technical Data
section of all the equipment manuals. Read the fluid and solvent manufacturer's warnings.
Comply with all applicable local, state and national fire, electrical and other safety regulations.
Symbols
Caution Symbol
This symbol alerts you to the possibility of damage to
or destruction of equipment if you do not follow the
instructions.
WARNING
CAUTION
308–607
3
Advertisement
Table of Contents
