Table of Contents
Advertisement
Instructions
Startup Screen
This screen is displayed for four seconds after the
system is turned on, then the Mode Selection screen
(or HOME screen) appears. If the system was turned
on previously, you will not see this startup screen.
Follow this procedure to check the status of dispense jobs.
1. Mode Selection (HOME)
a. Cursor is at RUN.
b. Press ENTER on the keypad.
2. Enter Password
NOTE: The password is optional and is determined by
what is entered during setup. Get the password from
your system administrator.
a. Cursor is in the PASSWORD field.
b. Type the password.
c. Press ENTER on the keypad.
3. Select Review
a. RUN screen appears.
b. Cursor is at NEW JOB.
c. Move the cursor to REVIEW by pressing the
or
key.
d. Press ENTER on the keypad.
36
308–607
Run Mode – Review Jobs
Screens
STARTUP Screen
HORIZON
REV 1.00.001
GRACO INC
COPYRIGHT 1996
HOME Screen
_ _ _ _ _ _ _ _ _ _
HOME
RUN
SETUP
INVNT
PASSWORD Screen
ENTER PASSWORD
RUN MENU
XXXX
RUN Screen
_ _ _ _ _ _ _ _ _ _
RUN
NEW JOB
REVIEW
_ _ _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _
Advertisement
Table of Contents
