Table of Contents
Advertisement
2. Select the Location pull-down menu and select Indoor or Outdoor.
Rebooting the
To reboot the unit, either power off on the unit or continue with these
steps:
Access Point
1. Select Maintenance > Reboot from the menu on the left.
2. Click the Reboot button.
3. When the access point displays a confirmation prompt, click OK to
4. To resume managing the unit, wait for it to complete initializing its
Allied Telesis recommends rebooting the access point after changing
the country and/or location setting.
reboot the unit or Cancel to cancel the procedure.
management software and then start a new management session.
Note
For instructions on how to configure the features of the access point,
see a User Guides for this access point.
Chapter 2: Installing the Access Point
71
Advertisement
Table of Contents
