TQ6702e GEN2 Outdoor Access Point Installation Guide
60
Figure 32. Attaching the Pole-Mount Bracket to the Pole
3. Attach the access point to the pole-mount bracket with the screws
using a Phillips-head screwdriver. See Figure 33 on page 61.
Note
Figure 32 shows how to attach the pole mount bracket to a vertical
pole as an example. You can also install the bracket to a horizontal
pole.
Note
Attach the ground cable to the access point before attaching the
mounting base to the access point. Refer to "Attaching the Ground
Cable to the Access Point" on page 39.